INCH-POUND
MIL-PRF-2939G
20 July 2001
SUPERSEDING
MIL-C-2939F(SH)
31 December 1990
PERFORMANCE SPECIFICATION
COOLING COILS, AIR, DUCT TYPE AND GRAVITY TYPE,
NAVAL SHIPBOARD ENVIRONMENTAL CONTROL SYSTEMS
This specification is approved for use by the Naval Sea Systems Command,
Department of the Navy, and is available for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers duct type and gravity type air cooling
coils for use in Naval shipboard environmental control systems.
1.2 Classification. Air cooling coils are of the following classes, sizes,
and compositions, as specified (see 6.2).
Class 1
-
Chilled water (DW), duct mounted
Class 3
-
Chilled Water (GW), gravity
Sizes:
Class 1
-
61-68
Class 3
-
1G, 3G, 5G
Composition
M
-
Magnetic
N
-
Nonmagnetic
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections
3 and 4 of this specification. This section does not include documents cited
in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet
all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, Naval Sea Systems Command, ATTN: SEA 05Q, 1333 Isaac Hull Avenue
SE Stop 5160, Washington Navy Yard DC 20376-5160 by using the Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 4130
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business