MIL-DTL-22576A
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND (NAVSEA) DRAWINGS
804-690702
-
Circular Diffusing Terminal for Air Conditioning Systems
(Copies of this document are available from the applicable repositories listed in S0005-AE-PRO-010/EDM online at
https://nll.ahf.nmci.navy.mil or from the Naval Ships Engineering Drawing Repository (NSEDR) online at
https://199.208.213.105/webjedmics/index.jsp. To request an NSEDR account for drawing access, send an email to
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AMERICAN NATIONAL STANDARDS INSTITUTE/AMERICAN SOCIETY FOR QUALITY (ANSI/ASQ)
ANSI/ASQ Z1.4
-
Sample Procedures and Tables for Inspection by Attributes
(Copies of this document are available from the American National Standards Institute, 25 W. 43rd Street, 4th Floor,
New York, NY 10036 or online at https://webstore.ansi.org/.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in accordance
with 4.2.
3.2 Design. The terminals furnished shall have contours, dimensions, and tolerances in accordance with
804-690702 for sizes specified (see 6.2).
3.2.1 Terminal sizes. Sizes of the terminals shall be limited to those shown on 804-690702 and in 1.2.
3.3 Materials.
3.3.1 Terminal material. Terminals shall be constructed of 5052 or 3003 aluminum. The hardest temper that
will withstand the forming processes shall be used.
3.3.2 Fasteners.
3.3.2.1 Screws. Corrosion-resisting steel screw fasteners shall be used to secure bellmouth to throat.
3.3.2.2 Rivets. Rivets shall be of 2014, 2017, 2024, 2117, or 5056 aluminum, or of corrosion-resistant steel.
3.3.3 Gasket material. Gasket material shall be of neoprene or rubber.
3.3.4 Recycled, recovered, environmentally preferable, or biobased materials. Recycled, recovered,
environmentally preferable, or biobased materials should be used to the maximum extent possible, provided that the
material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous
life cycle costs.
3.4 Construction.
3.4.1 Loose parts. Terminals shall be free of loose parts which will produce rattle or noise under conditions of
vibration.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business