A-A-1419 Filter Element, Air Conditioning (Viscous-Impingement And Dry Types, Replaceable) (Replaced By Ansi/Ashrea 52.1 And Ul900)This commercial item description covers standard dust-holding capacity, flat panel-type air-conditioning filters designed for arresting particulate matter in heating and ventilation systems in which the face valocity of the air stream approximately 300 feet per minute (fpm).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

A-A-1419D

4.8 Examination for preparation for delivery. A random sample of shipping containers shall be selected from each lot for examination of the unit, intermediate, and shipping containers (as applicable) for conformance with the preservation, packaging, packing, labeling, and marking required in the contract or order. Samples shall be selected in accordance with inspection level S-2, AQL 6.5, expressed in terms of defects per hundred units.

5. PREPARATION FOR DELIVERY

5.1 Packaging, packing, and marking. The packaging, packing, and marking shall be as specified in the contract or order.

6. NOTES

6.1 Ordering data. Purchasers should select the preferred options permitted herein and include the following information in procurement documents (if applicable).

a. Title, number and date of this commercial item description.

b. Size required and dimensions for special size filters (see 1.2)

c. When first article is required for inspection and approval (see 3.2, 4.3.1, and 6.2.

d. UL 900 class 1 fire resistant filter, if required.

e. The packaging, packing, and marking required.

6.2 First article. When a first article is required, it shall be tested and approved under the appropriate provisions of paragraph 52-209.4 of the Federal Acquisition Regulation (FAR). The first article for visual and dimensional examination should be a first production item or it may be a standard production filter unit from the contractor’s current inventory. First article testing and filter size required shall be as specified in ASHRAE Standard 52.

6.3 Part numbering. Filters conforming with this commercial item description shall be identified by a part number configuration consisting of identification of a portion of the specification number and size. An example of the part number configuration is shown below. This part numbering system is intended for identification and cross-indexing of the item within the Federal cataloging system. Part numbers are not required to be placed on the product or container.

AA1419-A Example: (AA1419-A)---Size A

AA1419- General commercial item description number

A- Size A, B, C, D, E, F, G, H, I, J, K, L, X