A-A-1419D
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified, a certificate of conformance to the test requirements of this commercial item description may be acceptable in lieu of testing bath lot. The contractor shall have available for review evidence that those tests specified herein have been performed , that the product tested conforms with the requirements of this commercial item description, and that the product offered has been manufactured at the same manufacturing facility using the same materials, processes, and manufacturing techniques, and is otherwise identical to the product tested. The tests shall be performed by a laboratory acceptable to the Government. Tests dated more than 1 year old are not acceptable.
4.3 Classification of inspections. The inspection requirements specified herein are classified as follows:
a. First article inspection (see 4.3.1)
b. Quality conformance inspection (see 4.5.1)
4.3.1 First article inspection. When required (see 3.2 and 6.1), first article visual and dimensional examination shall be performed in accordance with section 4.5 on filters of each size and thickness specified. In addition, first article testing in accordance with section 4.7 shall be performed on one filter unit of each thickness in the size specified by ASHRAE Standard 52.
4.3.2 Sampling. The levels of inspection and acceptable quality level (AQL) shall be in accordance with MIL-STD-105.
4.4 Lot information. All filters of the same size and thickness from the same manufacturer offered for delivery at one time shall be considered a lot for purposes of inspection and testing.
4.5 Sampling for quality conformance inspection. The inspection level shall be level I, AQL 6.5, expressed in terms of defects per hundred units. The sample unit shall be one filter.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business