MS35845F
TABLE I. Dash numbers and dimensions
DASH NO. |
DIMENSIONS |
FLARE CONNECTION SIZE |
CAPACITY |
||
A ± .500 |
0B MAX. O.D. |
WATER (MINIMUM AT 125 °F) DROPS |
DRYING TONNAGE TR |
||
-1 |
6.000 |
2.593 |
.375 |
80 |
2 |
-2 |
6.750 |
3.062 |
.375 |
120 |
3 |
-3 |
6.875 |
3.062 |
.500 |
200 |
5 |
-4 |
10.250 |
3.562 |
.625 |
300 |
7.5 |
-5 |
10.312 |
3.562 |
.625 |
400 |
10 |
REQUIREMENTS:
1. Rating condition: Dehydrators shall comform to the standard rating condition specified in Air-Conditioning, Heating and Refrigeration Institute standard ARI710.
2. Materials: A. Desiccant - activated alumina, silica gel, anhydrous calcium sulphate, molecular sieve, or any combination of these in molded or granular form.
B. Shell - copper, brass, or steel.
C. Strainer - corrosion - proof strainers suitable to retain the type of desiccant used.
3. Strength: Conforn to UL standard UL207.
4. Dehydhators shall be of a non-refillable type for use with refirgerant conforming to A-A-58060.
5. Dimension "A" may be attained on shorter units by use of an adaptor or extension supplied with the unit and having the same type end connection.
6. Finish: The shell, when steel, shall be corrosion-resistant treated outside.
7. The shell when fabricated of steel shall be brazed, silver soldered, or welded. When brass or copper shall be brazed or silver soldered.
8. Maximum shell diameters are not intended to preclude dehydrators having welded beads around the circumference of the shell in excess of diameters shown.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business