MS17241C
TABLE I. Part Numbers and Dimensions.
PART NO. |
CAPACITY (MIN) |
DIMENSIONS |
FEMALE SOLDER JOINT SIZE |
||
A ±.500 |
B (MAX) |
C |
D |
||
T.R. |
INCHES |
INCHES |
INCHES |
INCHES |
|
MS17241-1 |
1/12 |
9.500 |
1.625 |
.250 |
.500 |
MS17241-2 |
1/6 |
11.875 |
1.625 |
.250 |
.500 |
MS17241-3 |
1/4 |
15 |
2.125 |
.375 |
.625 |
MS17241-4 |
1/3 |
15 |
2.125 |
.375 |
.625 |
MS17241-5 |
1/2 |
15.250 |
2.250 |
,375 |
.875 |
MS17241-6 |
3/4 |
14.750 |
3.125 |
.375 |
1.125 |
MS17241-7 |
1 |
15.625 |
3.625 |
.500 |
1.125 |
MS17241-8 |
2 |
15.625 |
5 |
.625 |
1.375 |
NOTES:
1. Rating conditions: Interchangers shall be capable of raising the suction gas temperature from minus 5 °F, at a pressure corresponding to minus 10 °F. Saturated to plus 30 °F superheated leaving temperature, with the returning liquid temperature hot higher than 100 °F.
2. Materials: Shell - brass, copper, aluminum jacketed or steel, corrosion resistant treated.
3. Solder connection ends: Shall be in accordance with ASME B16.22.
4. Strength: Factory test pressure - 235 P.S.I.G. (MIN).
Burst pressure (both circuits) - 1175 P.S.I.G. (MIN).
5. Pressure drop: Gas circuit - 1/4 P.S.I.G. at minus 10 °F, evaporated.
1/2 P.S.I.G. at plus 25 °F, evaporated. Liquid circuit - Negligible.
Dimension "A" may be obtained on shorter units by use of a tube extension supplied with the unit and having the same type end connection.
6. For design feature purposes this specification takes precedence over documents referenced herein.
7. Referenced documents shall be the issue in effect on the date of invitation for bids.
8. Part number: The MS part number consists of the MS number plus the dash number.
Example: MS 17241-1.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business